Enquire Now

GM

Refrigeration unit GM

Zanotti will introduce new GM refrigeration units into the refrigeration market which will replace the old range supplied till now.

GM models are very versatile monoblock refrigeration and food equipment which can be installed in the cold room either in a straddle position or through-the-wall with a thru-wall kit.

The new compact and modern design is even more emphasized by the new metallic grey colour.

The evaporating side is white purposely by design so that it can merge in with the cold refrigeration units. The whole range is equipped with hermetic compressors with R404A.

Product category:

For medium temperature applications compressors working with R134A refrigerant are already available. All the units of the GM series can be supplied with compressor compartment insulated with suitable soundproofing material to reduce unit noise level during functioning in frequently visited areas. If necessary it is possible to duct away the air coming out of the condenser, by using a centrifugal fan, supplied as an option on request. The air is expelled from the room (in which the unit is set ) through a duct.

On our units we employ both microchannel condensers as well as grooved pipe ones in order to obtain a higher efficiency and a reduction in consumption. The units are provided with a new generation control panel with an easy-to-use interface.

The units are provided with:

  • automatic alarm system in case of insufficient cleaning of the condenser;
  • capillary tube for refrigerant expansion;
  • wholly automatic hot gas defrost;
  • switchboard with electronic control board and management keypad;
  • automatic system for condensate evacuation, no outside connections for water drainage are usually necessary;
  • power supply cable;
  • door micro-switch cable;
  • cold room light cable, lamp and lampholder;
  • cable for door heater for low temperature units only.

The cables supplied are 2 m long, different lentghs (ie. 5 or 10 m) are available on request.

The units are provided with a new generation control panel with an easy-to-use interface.

The main functions are:

  • thermostat differential setting;
  • room temperature setting;
  • automatic or manual defrost;
  • evaporator fan starting delay;
  • drain down delay after defrost for condensate drainage;
  • probe failure alarm;
  • cold room light switch;
  • protection regarding the number of pressure switch trips

Available options:

  • connection module for monitoring, remote management and data recording through an external supervision system;
  • module for remote management of the keypad over than 10 metres;
  • insulated wall kit with 100mm thickness for the conversion of the unit from straddle-type one to through-the-wall unit;
  • electric defrost;
  • water cooled condenser;
  • remote control panel;
  • compressor compartment sound proofing to reduce the condensing unit noise level;
  • kit for outside installation consisting in: condenser fan pressure switch or condenser fan speed regulator, compressor crankcase heater, dual defrost solenoid valves;
  • voltage monitor;
  • different voltage.

Advantages

  • versatility: installation through-the-wall or in straddle position
  • high efficiency with compact dimensions
  • automatic alarm system for condenser cleaning
  • New generation control panel: possibility to connect it to remote management system or by a Modbus system
  • low noise level thanks to compressor compartment soundproofing
  • water cooled condenser on request
  • possible ducting of the air coming from condenser

AS A PART OF CONTINOUS DEVELOPMENT AND UPGRADATION THE PRODUCT IMAGE/ACCESSORY/FEATURE/SPECIFICATION MAY BE DIFFERENT FROM ACTUAL PRODUCT AT THE TIME OF PURCHASE.

Customer Support Information: Give A Missed Call: @ 9210188999, Call Our Customer Contact Centre: 011-40319300or Write To Us at: customerservice@daikinindia.com
X